Nevada

Our ladder lifts are versatile and very practical and can be used in a wide range of trades.
All our ladder lifts comply with machine directive 2006-42-CE (see assembly instructions).
Professional ladder lifts to meet the needs of most demanding workers.

Versatile products made for roofers, bricklayers and general building companies as well as drywall workers.
Highly practical, you can cross obstacles and different angles thanks to adjustable steel bend sections from 0 to 65° depending on the models.
Aluminium or steel ladders fit together, are interchangeable and offer high rigidity. Max height from 20.00 to 32.00m.

The “CE” declaration of conformity has been completed and can be found on the last page of the assembly instructions. Each winch is individually identified and has a CE mark.
The COMABI NEVADA ladder lift, made in France, is recommended for intensive use up to a maximum height of 20.00 m.
This ladder lift is made of aluminium and has a payload of 150 kg/m².
This product complies with NF EN 12158-2 and Machinery Directive 2006-42-CE.
Recommended for the following trades: 

Finishing work
Finishing, Decorating, Painting
Maintenance
Roofing, Plumbing

2 year guarantee parts and labor. 

Can be upgraded to the top of the range, compatible with MONTANA (identical ladders).
Vertical loading possible on R200-frame façade scaffolding and M368 multidirectional scaffolding

It has the following characteristics: 

Useable load 150kg
Bend section (included) 0 to 60°
Useable length up to 20.00m
Work angle 30 to 90°
Winch 220V mono. 16A plug. 2 P+ G
Lifting speed 20m per min
Lifting-lowering-emergency stop remote control
24V low voltage
Lower slack-cable limit switch
Upper limit switch: by electric sensor
Supply cable (not included): <25 m – 3 x 2.5mm2