Montana

Our ladder lifts are versatile and very practical and can be used in a wide range of trades.
All our ladder lifts comply with machine directive 2006-42-CE (see assembly instructions).
Professional ladder lifts to meet the needs of most demanding workers.

Versatile products made for roofers, bricklayers and general building companies as well as drywall workers.
Highly practical, you can cross obstacles and different angles thanks to adjustable steel bend sections from 0 to 65° depending on the models.
Aluminium or steel ladders fit together, are interchangeable and offer high rigidity. Max height from 20.00 to 32.00m.

The “CE” declaration of conformity has been completed and can be found on the last page of the assembly instructions. Each winch is individually identified and has a CE mark.
The COMABI MONTANA ladder lift is recommended for intensive use up to a maximum height of 32.00 m.
This ladder lift is made of aluminium and has a payload of 200 kg/m².
This product complies with NF EN 12158-2 and Machinery Directive 2006-42-CE.
2 year guarantee parts and labor. 

Load 200 kg up to a height of 32 m.
Semi-automatic encasing of the winch and containers (crate, skip, etc.) for fast, reliable installation.
Vertical loading possible on R200-frame façade scaffolding and M368 multidirectional scaffolding. 

It has the following characteristics: 

Ladder 2.00 m – 12 kg only
Oblong bars
Payload including vertical 200 kg
Bend section adjustment 0 to 60°
Useful length 32.00 m
Working angle 30 to 90° to the ground
Lift speed 22 m/min
Winch: 1100 W – 230 V mono – electronic board
Cable length 65.00 m – Ø 5 mm
Detachable 24 V remote control
Lower switch with detachable limit
Upper limit switch: electric sensor
Safety: automatic slack cable
Power cable (not supplied): <25 m – 3 x 2.5 mm2