Hooped ladders

For safe access to roofs, buildings and industrial facilities.
Aluminium
StandardsEN 1090 | EN ISO 14122 | NF E 85016
Decree 2004•924
> For your safety
Hoop ladders are access ladders; should be used for this purpose only. It must be installed by specialist professionals and approved by an official body. Our liability covers only the supply of the equipment.
> Unique model
Each set of hoop ladders is unique. It must meet a set of specifications that corresponds to the specific constraints of each installation.
> Perfectly customisable
The hooped ladders are made up of standard modules and designed for easy assembly. Customisable to any type of rigid surface: wood, sheet metal, brick, concrete and cladding.
> Saves space and better protection during transport
The parts are identified by module upon delivery, along with screws and assembly instructions.
> 100% aluminium omega profiles
For greater rigidity and improved wind resistance. No vibration.
> Maximum load 150 kg
> 5 year guarantee
A few important points:
- The ladder must be fitted with a hoop if it is longer than 3 m.
- The first hoop is installed between 2.20 and 3 m from the ground.
- A flight of ladders may not be longer than 8 m. Beyond this point, a resting platform will be installed at intervals of no more than 6 m.
4 TYPES OF EXIT
STRUCTURE DELIVERED ON PALLETS WITH SCREWS AND ASSEMBLY INSTRUCTIONS
HOOP LADDER COMPOSITION:
- Raw aluminium ladders (280 step) – Bolted or crimped to the ladder
- Omega profile for hoops, 4 back protection heights
- Plastic connectors
- Clip fastening around ladder uprights (no drilling)
BEFORE PLACING AN ORDER, YOU MUST KNOW:
- The total height to be reached
- The wall thickness
- The descent height
- The wall material
- The intermediate access heights
- The exit mode
INFORMATION:
- 700 mm passage (diameter)
- Back protection from 3 m upwards
- Option to add a
parapet crossing
“READY TO ASSEMBLE”
WE PRE-ASSEMBLE HOOPS IN OUR FACTORY (QUOTE ON REQUEST)
The components of each module are delivered ready to assemble. They are drilled, cut to the required length and supplied with a screw kit and specific assembly instructions. Only the starting ladder needs to be adjusted in length when the complete structure is installed.
2 CONFIGURATION EXAMPLES
STANDARD PACKS
Ready to install
Compositions 100% compliant with standard NFE 85-016 (including landing step and gate). Fixings can be customised for concrete walls. Price of sets calculated with a front exit

Haven’t found what you’re looking for?
Design your custom crinoline ladder using our components

STANDARD HOOP
Ladder not supplied with the standard hoop.
the standard hoop.
Height from 0.62 cm to 1.46 m,
every 28 cm
Manufacture and design in our 2 factories in France.
Our design office will assist you with your custom projects.
Our products meet the highest quality standards.